Pay in 4 interest-free payments of $3.74 Learn more
Ships within 48 hours · Estimated delivery Oct 11 - Oct 16
This unit will replace the factory unit stamped with the following numbers:
This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Triumph Street Triple 675 for the years and models shown above
Honda VT 250 FL Spada (1989-1990)
For models that are 100mm you will need to fit a plate or bracket to bridge to gap
Honda PC 800 Pacific Coast (RC34) (1989-1998)
Headstock Bearings and Seals: KTM EXC-E300 EXC-E 300 (2008-2010) Honda CBR250 This unit will replace theBrand new set of headstock steering bearings and seals to fit: KTM EXC E 300 (2008 2010). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM EXC E300 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require
US$ 15.90
US$ 10.50
US$ 10.50
US$ 11.90
US$ 10.50
US$ 10.50
US$ 12.90
US$ 12.90
US$ 10.50
US$ 10.50
US$ 12.90
US$ 12.90
US$ 16.50
US$ 11.90
US$ 29.99
US$ 10.50
