headstock bearings and seals honda xr500 xr 500 1979 1980 Honda VTX1800 To replace OEM: 30510-KT7-013 or

To replace OEM: 30510-KT7-013 or 30510-KT7-023

2003 & 2004 models

This ignition coil pack set has been specifically manufactured to replace the original coil on a KTM SX 50 Franco Morini S5

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Suzuki UH200 for the years and models shown above

If you have a weak spark on your Suzuki GS1100 then the ignition coils (or plugs / plug caps) are the likely culprit and it's a good idea to get these replaced especially as the original coils are all now over 40 years old

headstock bearings and seals honda xr500 xr 500 1979 1980 Honda VTX1800 To replace OEM: 30510-KT7-013 orBrand new set of headstock steering bearings and seals to fit: Honda XR 500 S (1979 1980). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda XR500 for the years and models shown above. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 27mm x 48. 5mm x 19mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require