headstock bearings and seals ktm exc300 exc 300 1996 2013 Suzuki RM400 This ignition coil has been

This ignition coil has been designed to replace the original unit on a Suzuki DR 200 SE for the years 2003

This set of rear shocks is designed to replace the original factory shocks on a Honda CB250 for the years shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a VF1000 for the years and models shown above

Yamaha XJ 650 Turbo (1982)

Honda CX 500 TCC Turbo (1982)

headstock bearings and seals ktm exc300 exc 300 1996 2013 Suzuki RM400 This ignition coil has beenBrand new set of headstock steering bearings and seals to fit: KTM EXC 300 (1996 2013). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM EXC300 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require