headstock bearings and seals honda xr200 xr 200 1980 Honda CR50 Honda NSR 80 (1988-1999)

Honda NSR 80 (1988-1999)

This ignition coil set has been manufactured to replace the original coil packs on a Kawasaki VN2000 for the years and models shown above

Yamaha XJ 600 N Diversion (1994-2002)

ACI603 & ACI604 or if you have an EFI Technology unit it will replace the following CDI stamped units AC2i

This set of headstock bearings are taper roller style and have been manufactured to replace the original steering / headstock bearings on a Kawasaki Z1000 / KZ1000 for the years shown above

headstock bearings and seals honda xr200 xr 200 1980 Honda CR50 Honda NSR 80 (1988-1999)Brand new set of headstock steering bearings and seals to fit: Honda XR 200 R (1980). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda XR200 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different