Autonics Photoelectric Sensor, Photoelectric Type BJ100-DDT-C Stroke_361^750mm Bolt: Steel chromium molybdenum

Bolt: Steel chromium molybdenum

Sensing type Retroreflective type(built-in polarizing filter) Sensing distance 4m(MS-2A) Sensing target Opaque material of min

5 kA at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 60 A at 50 °C Protection type Short-circuit protectionOverload protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 8500 cycles Electrical durability Category A: 1500 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 25 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 130 mm Width 75 mm Depth 60 mm Environment Standards GB/T 14048

500 mm Maximum RPM 6500 RPM Manufacturer UPC Number 4547359004892 Weight 2

NTN 22208EAKD1 Spherical Roller Bearing (Inside Dia - 40mm

Autonics Photoelectric Sensor, Photoelectric Type BJ100-DDT-C Stroke_361^750mm Bolt: Steel chromium molybdenumSensing type Diffuse reflective type Sensing distance 100mm Sensing target Opaque, Translucent material Light source Infrared LED(850nm) Response time Max. 1ms Power voltage 12 24VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output NPN open collector Connection type Connector type(M8) Environment_Ambient illumination Sunlight: Max.