Autonics Photoelectric Sensor, Photoelectric Type BEN5M-MFR Stroke_25^500mm Nominal dimensions are printed on

Nominal dimensions are printed on the pin gauge

Specification item model symbol Specification information With auto switch - Without auto switch installation support B Basic type tube inner diameter 32 Bore size 32mm Types of port screws - Rc cylinder stroke 100 cylinder stroke 100mm Cylinder additional symbol - No bellows

Specification item model symbol Specification information Piping type - standard type tube inner diameter 10 tube inner diameter 10mm Types of port screws - Rc cylinder stroke 250 Cylinder stroke 250mm With/without switch rail - Attaching the switch rail auto switch - ø6 to ø15

415 V AC 50/60 Hz conforming to EN/IEC 60947-225 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-210 kA Icu at <= 125 V DC conforming to EN/IEC 60947-2 Utilisation category Category A conforming to EN 60947-2Category A conforming to IEC 60947-2 Suitability for isolation Yes conforming to EN 60898-1Yes conforming to EN 60947-2Yes conforming to IEC 60898-1Yes conforming to IEC 60947-2 Standards IEC 60898-1EN 60898-1IEC 60947-2EN 60947-2 Quality labels NF Complementary Network frequency 50/60 Hz Magnetic tripping limit 8 x In +/- 20 % [Ics] rated service breaking capacity 50 kA 100 % conforming to EN 60947-2 - 220

Specification item model symbol Specification information With auto switch D With auto switch Mounting support type B Basic type (with bosses on both sides) tube inner diameter 20 tube inner diameter 20mm cylinder stroke 100 cylinder stroke 100mm Cylinder additional symbol - Rubber cushion

Autonics Photoelectric Sensor, Photoelectric Type BEN5M-MFR Stroke_25^500mm Nominal dimensions are printed onSensing type Retroreflective type(standard type) Sensing distance 5m(MS 2) Sensing target Opaque material of min. 60mm Light source Infrared LED(940nm) Response time Max. 20ms Power voltage 24 240VAC~ 10% 50 60Hz, 24 240VDC 10%(ripple P P: max. 10%) Current consumption Max. 4VA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by switch) Control output Relay Connection type Cable type(5, 2m) Environment_Ambient