Autonics Photoelectric Sensor, Photoelectric Type BRQT400-DDTA Stroke absorption_03^7 4G MILL SEME7206035 6 6

4G MILL SEME7206035 6 6 35 90 4 29

5 kA at 220/230/240 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 200 A at 50 °C Protection type Overload protectionShort-circuit protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 10000 cycles Electrical durability Category A: 5000 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 35 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 165 mm Width 105 mm Depth 60 mm Environment Standards EN/IEC 60947-1GB/T 14048

•Easy to read oil level through sight glass

Specification item model symbol Specification information With auto switch - Without auto switch installation direction B transverse installation tube inner diameter 12 tube inner diameter 12mm cylinder stroke 30 how it works D double acting rod end screw M rod end male thread auto switch - Without auto switch Built-in magnet Without rod with switch Auto switch additional symbol - 2 with or without Custom made specifications - standard

6299 in Closure Type Double Shielded Row Type & Fill Slot Single Row Non-Fill Slot Snap Ring Included Without Snap Ring Internal Clearance CN Operating Temperature Range -40 to 250 ºF Cage Type Pressed Dynamic Load Capacity 5910 lbf Static Load Capacity 4750 lbf Precision Rating ISO Class 0 Seal Type None Finish/Coating Uncoated Bearing Material High Carbon Chrome Steel Cage Material Steel Inner Ring Width 16

Autonics Photoelectric Sensor, Photoelectric Type BRQT400-DDTA Stroke absorption_03^7 4G MILL SEME7206035 6 6Sensing type Diffuse reflective type Sensing distance 400mm Sensing target Opaque, Translucent material Light source Red LED(660nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Max. 30mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by control wire) Control output NPN open collector Connection type Cable type(4, 2m) Environment_Ambient illumination Sunlight: Max.